Operation 2. Common Functions
2.1 Current Robot
Current robot number, name, and model are displayed.
To change the robot:
Tap the panel to display the list, and select the robot to change.
The robot cannot be registered to the Robot system by the Teach Pendant.
The robot can be changed in TEACH mode (TEACH/T1, TEACH/T2), but not in AUTO
mode.
NOTE
T2 mode cannot be used on RC700-A Controllers complying
2.2 Status Bar
This area displays the current robot status.
Emergency Stop
Safeguard
Motor
Power
34
Name
Displays the emergency stop status
To release the emergency stop state,
tap the <Reset> button.
Refer to: Operation 3.1.3 Command Buttons
Displays the safety door status
Displays the robot motor status
Displays the robot motor power status
with
the UL standards.
Description
RC700-A option TP3 Rev.8
Value
ON / OFF
ON / OFF
ON / OFF
HIGH / LOW