Table of Contents
Advertisement
Operation 2. Common Functions
2.4 Sub Menus
Tap the menu button on the right to display the sub menu.
The displayed sub menu differs depending on the currently operating panel.
2.4.1 Change Jog Key
Selecting "Change Jog Key" from the sub menu list enables you to change the axes
corresponding to the hardware keys.
When using the 7-axis robot, you can make the lower three sets of keys correspond with
different axes. If the keys do not need to be changed, this menu cannot be selected.
After changing the keys, the axes guide display will be updated.
2.4.2 System History
Selecting "System History" from the sub menu list displays the [System History] panel.
Displays events, errors, and warnings recorded in the current Robot system history.
Data to Display
From/To
Message
Contains
Time Zone
Refresh
Date/Time
Type
42
Item
Select the panel to display. (All, Events, Errors, Warnings)
Select the period to display the data.
The default setting is from the history start date to the history
end date.
Enter the error message to search and tap the <Refresh> button.
Select the time zone.
Time of event, warning, and error occurrence are displayed
according to the selected time zone.
Load the data from the Robot system.
Date and time of the selected item are displayed according to
[Time Zone].
Event
Description
: Information of operation and mode changes by the
operator.
RC700-A option TP3 Rev.8
Advertisement
Table of Contents
