Connection Examples - Epson TP3 Manual

Functions & Installation 3. Installation
(3)
(4) Tap the <Execute> button to shut down the Teach Pendant.
(5) Turn the connector of the Teach Pendant counterclockwise lightly and pull it from the
■ Before removing the Teach Pendant connector from the TP port on the Controller,
be sure to shut down the Teach Pendant by tapping the <Execute> button on the
[Configuration] panel.
If the connector is removed without shutting down, the data may not be saved
CAUTION
properly.

3.5.2 Connection Examples

When connecting the Teach Pendant to the Controller directly:
When using an extension cable:
Extension cable
NOTE

To extend the cable, use the extension cable (optional: 10 m or 15 m).
14
Select "Shutdown" from the [Function] list.
For details, refer to the following section:
Operation 5.3.4 Shutdown
TP port of the Controller.
RC700-A option TP3 Rev.8