Display - Mocon CheckPoint 3 User Manual

64 User Guide

Display

The Display parameters are all related to the display readability.
Restore defaults
Brightness
Contrast
Backlight
Selecting a parameter, e.g. Brightness, brings up a window....
...where value can be set from 1 to 10 by tapping the
Setting impact is seen while adjusting.
P/N 340486-B
09/2017
EN
Resets the settings of the 3 display parameters below to the
factory settings.
Adjust display brightness (1-10).
Adjust display contrast (1-10).
Adjust display background light (1-10).
CheckPoint 3
buttons.
DANSENSOR