Start Up; Black Box" Models; Display Models - Mocon AMETEK Dansensor MAP Check 3 Vacuum User Manual

32 User Guide

Start up

"Black Box" models

When power is applied to the unit, the indicator on the front will be lit.

After a short internal self diagnosis the device will start heating up the sensors. During this

period the indicator will turn red (steady).
When heating period has finished the indicator will change to green (steady) and the

device is now ready for use.

Display models

When first powered ON the display will shortly show the

Dansensor® MAP Check 3 Vacuum splash screen.
After a short internal self diagnosis the device will start heating up the sensors.

25: Meat Mix 1000gr.
Product
During this time the "Measure" button will be disabled. If device is set to "Autostart" it will
automatically start when heating period finishes.
While heating, you can go to the Main menu by pressing the Menu key - see
on page 53
P/N 320598-G
11/2019
12:37
28/03/11
Heating
Time left 07:43
Menu Measure
for details.
EN Dansensor MAP Check 3 Vacuum
®

"Main menu"