Network Connection - Mocon CheckPoint 3 User Manual

28 User Guide

Network connection

NOTE! Always consult your network administrator before making network
settings, as incorrect settings can result in reduced or no network activity.
The Network setup function on the device offers 2 ways to establish the network connection
between CheckPoint 3 and the computer/tablet:
Connect to Network

Create Network

Connect to Network
Requirements:
An active "Access point" (Wi-Fi router) within the reach of CheckPoint 3.

A computer or tablet connected to the active "Access Point" (via LAN or WLAN).

On CheckPoint 3:
1. Login as Supervisor.
2. Go to
3. Make sure Wi-Fi module is off.
4. Select Connect to Network.
P/N 340486-B
09/2017
Menu -> Setup ->
EN
Network.
CheckPoint 3
DANSENSOR