CheckPoint 3
Appendix
Safety and handling instructions
WARNING! Personnel operating and maintaining the device must be familiar with
all aspects of its operation and be proficient in maintenance.
Such personnel should review the following precautions to promote safety
awareness.
Failure to follow the safety instructions could result in fire, electric shock, injury, or
damage to CheckPoint 3 or other property.
NOTE! The manufacturer cannot be held responsible for any damage caused by
incorrect operation or maintenance of the device.
Handling and maintenance
Be sure to disconnect electrical power and unplug the unit before performing any cleaning
or maintenance.
When operating or maintaining the equipment always obey the relevant rules and
regulations for workers safety.
Handle the device with care. It is made of metal, glass, and plastic and has sensitive
electronic components inside.
The device can be damaged if dropped, burned, or crushed, or if it comes in contact with
liquid.
Do not use a damaged device, such as one with a cracked screen, as it may cause injury.
Do not cover the device with a cloth or piece of plastic to protect it from dust, as this
prevents free air circulation around the device and might lead to overheating.
Do not expose the device to heavy moisture or heat and keep it away from direct sunlight.
If you're concerned about damaging the device or scratching the device surfaces, consider
using the protective bumpers - see
Repairing
Don't open the device and do not attempt to repair it yourself, as this may damage it or
may cause injury to you.
If device is damaged, malfunctions, or comes in contact with liquid, contact your
authorized MOCON service provider.
Needles
Never block needles.
Replace needles if they get clogged (e.g. when cutting through septa).
Do not expose the needles to liquids.
DANSENSOR
EN
"Consumable parts and options" on page 74
User Guide
75
for details.
P/N 340486-B
09/2017