Mocon CheckPoint 3 User Manual page 21

CheckPoint 3

Wi-Fi status *

Measurement validity *
DANSENSOR
EN
Shows Wi-Fi connection type and/or Wi-Fi signal
strength:
..... Wi-Fi set to "Connect to Network".
Icon indicates signal strength.
Wi-Fi set to "Connect to Network", but Wi-Fi
module is off.
Wi-Fi set to "Create Network"
Wi-Fi set to "Create Network", but Wi-Fi
module is off.
When Wi-Fi fast access is enabled in Network setup, the
icon also acts as a button giving fast access to the Wi-Fi
on/off setting. In this case the operator can turn the Wi-Fi
module on/off without being logged in as Supervisor.
See "Network" on page 58
The icon shows the validity of the most recent
measurement.
Tapping this icon within 30 s. after performing a
measurement, will mark this measurement as invalid in
the data log, and the icon will change from
The icon is only visible when Invalid meas. fast access is
enabled in Data log setup, otherwise the function is only
available from the Data log menu - see
page 51 for details.
User Guide
for details.
to
"Data log" on
P/N 340486-B
09/2017
19
.