Supervisor Pin Code - Mocon CheckPoint 3 User Manual

CheckPoint 3 EN User Guide 63

Supervisor PIN code

Use this function to change the PIN code required for changing from User access level to
Supervisor access level.
To change the PIN code do the following:
1. In the Setup menu select Supervisor PIN code.
This screen appears:
2. Enter current PIN code and tap OK.
3. Enter new PIN code and tap OK.
4. Enter new PIN code again and tap OK.
5. Tap OK to confirm. PIN code has now been changed.
P/N 340486-B
09/2017
DANSENSOR