Mocon CheckPoint 3 User Manual page 40

38 User Guide
Setup
Applies largely to the corresponding functions on the device, but with the following
differences:
Network
Users
Date/Time/Units
P/N 340486-B
09/2017
EN
Only display of current network settings. Settings can only be
made on the device.
Shows User list in "Last used" order, no sorting possible.
Check CheckPoint 3 time against PC time when connected:
If difference exceeds value as set in Notify if difference is
bigger than, a warning pops up on the Home screen when
launching the application.
To update time on the device, enter the time from the PC time
field in the Time field on the left and press
transfer this time to the device.
CheckPoint 3
Synchronize to
DANSENSOR