Download Print this page

New Product - Mocon CheckPoint 3 User Manual

Hide thumbs

Advertisement

CheckPoint 3

New product

Creates a new, blank product. The following parameters can be set for a product:
TIP! If a new product will be very similar to an existing product, you might want to use the
"Copy Product" function.
Product name
Product ID
Measure CO2
Display Balance
O2 high alarm limit
O2 low alarm limit
CO2 high alarm limit
CO2 low alarm limit
When finished, a warning appears when exiting the function:
Tap Yes to save the new product and return to the
DANSENSOR
EN
A unique product name (up to 32 characters).
Unique product identification code (up to 32 characters).
Select whether or not the measured CO
displayed on the measuring screen.
(Only applies to models with CO
Select whether or not the balance value should be displayed
on the measuring screen.
Setting of the O
and CO
2
2
Setting an alarm value to 0 will deactivate the alarm.
Products menu.
User Guide
value should be
2
sensor)
2
alarm limits (0.1 - 100%).
P/N 340486-B
49
09/2017

Hide quick links:

Advertisement

loading