Measuring; Selecting A Product For Measuring - Mocon CheckPoint 3 User Manual

24 User Guide

Measuring

Selecting a product for measuring

(Premium models only)
1. In the measuring screen....
... tap the
(This screen can also be reached by tapping the
select Products -> Active Product).
The Active Product screen lists all products in last used order with the currently selected
product at the top (in orange).
2. Use
3. Once you have found the required product, tap it to select it and return to the measuring
screen.
Show product info
From the products list you can have a quick view of a specific product's settings by pressing
and holding the specific product for approx 3 s.
This will bring up an Information window showing the Product info for the selected
product.
Tap OK to close window.
P/N 340486-B
09/2017
icon in the top left corner. This will bring up the Active Product screen.
and keys to scroll through the list to find the appropriate product.
NOTE! If you have a large number of products, scrolling through the list may be
quite time consuming. In this case you can use the "Find" function - see
on page 50 for details.
EN
icon in the top right corner, and then
CheckPoint 3
"Find"
DANSENSOR