CheckPoint 3
Accessories
The following accessories are included with CheckPoint 3:
Power supply w/ interchangeable plugs
Plug:
Type:
Area/Country*:
* Compatibility is not limited to the indicated areas/countries.
USB cable
Use cable to connect the device to the power supply
"Charging and monitoring the battery" on page 20
Septa (100 pcs.)
When performing a measurement, a septum should be applied to the package in order
to ensure a leak free gas extraction and to protect the package from tearing at the
piercing point - see
Needles (10 pcs.)
Needles are used to penetrate the package (and septum
measurement - see
Filters (10 pcs.)
When performing a measurement, particles or fluids can enter the measuring system
causing damage to the instrument. Therefor a filter must be installed between the
needle
and the sample hose - see
details.
DANSENSOR
EN
US
EU
North America
Europe
Thailand
Taiwan
"Measuring" on page 24
for details.
"Measuring" on page 24
for details.
"Assembling the sample gas hose" on page 12
AU
Australia
United Kingdom
New Zealand
or to a PC for charging - see
for details.
) to perform a test
User Guide
11
UK
Singapore
Malaysia
for
P/N 340486-B
09/2017
Need help?
Do you have a question about the CheckPoint 3 and is the answer not in the manual?