Operation Lock Function - Mitsubishi Electric PAR-33MAA Manual

5. Restriction

5.2. Operation lock function

• To enable the operation lock function, set the item "Operation locked" to "Yes".
• The On / Off operation, Operation mode setting, Preset temp, Setting and Vane Setting operations can all be restricted.
Button operation
[ 1 ]
Restriction
Operation locked
On/Off Mode Set temp.
Vane
Setting display:
Page
F1 F2 F3
[ 2 ]
Restriction
Operation locked No /
On/Off Locked
Mode Locked
Set temp. Locked
Vane
Locked
Select:
Cursor
F1 F2 F3
Restriction
Operation locked
On/Off Mode Set temp.
Vane
Changes saved
Main menu:
Room
Cool Set temp.
Mode
(When Set temp. is locked)
Bring up the Restriction setting screen. (refer to D-37)
No
Move the cursor to "Operation locked" and press the
F4
The screen to make the settings for the operation lock function will appear.
Yes
Move the cursor to the desired item with the F1 or F2 button out of "Op-
eration locked", "On / Off", "Mode", "Set temp.", or "Vane".
Change the settings with the F3 or F4 button.
Cursor
• Operation locked: No (disable) / Yes (enable)
• On / Off: On/Off operation
F4
• Mode: Operation mode setting
• Set temp.: Preset temp. setting
• Vane: Vane setting
Press the
Yes
A confirmation screen will appear.
Fri
will appear on the Main display
in the Full mode when the operation
lock function setting is enabled.
Auto
Operation guide that corresponds
to the locked function will be sup-
pressed.
Fan
– / Locked
button to save the settings.
Navigating through the screens
• To go back to the Main menu ..................
• To return to the previous screen ...............
MA REMOTE CONTROLLER
P
button.
button
button
"Operation locked" will appear
if operation is attempted in the
"Operation locked" state.
Operation locked
Fri
Room
Cool Set temp. Auto
Mode Fan
D-39