Download  Print this page

Lossnay Setting (city Multi - Mitsubishi Electric PAR-33MAA Manual

Hide thumbs

Advertisement

MA REMOTE CONTROLLER

6. LOSSNAY setting (City Multi)

This setting is required only when the operation of City Multi units is interlocked with LOSSNAY units. This setting is not avail-
able for the Mr. Slim units. Interlock settings can be made for the indoor unit to which the remote controller is connected. (They
can also be confirmed or deleted.)
note: • Use the centralized controller to make the settings if it is connected.
• To interlock the operation of the indoor units with the LOSSNAY units, be sure to interlock the addresses
of ALL indoor units in the group and that of the LOSSNAY unit.
Button operation
[ 1 ]
S
e
v r
c i
e
m
e
n
u
Test run
Input maintenance info.
Lossnay
Check
Self check
M
a
n i
m
e
n
: u
C
u
s r
r o
[ 2 ]
Lossnay
IU address
Lossnay address
Collecting data
F1
F2
F3
[ 3 ]
Lossnay
IU address
Lossnay address
Function Set/Conf/Del.
Select:
Cursor
Address
D-70
Select "Service" from the Main menu (refer to D-15), and press the
ton.
Select "Lossnay" with the F1 or F2 button, and press the
When "Lossnay" on the Service menu is selected, the remote controller will auto-
matically begin searching for the registered LOSSNAY addresses of the currently
connected indoor unit.
F4
When the search is completed, the smallest address of the indoor units that are
connected to the remote controller and the address of the interlocked LOSSNAY
unit will appear. "--" will appear if no LOSSNAY unit is interlocked with the indoor
units.
If no settings need to be made, press the
vice menu.
P
OFF
but-
button.
button to go back to the Ser-

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric PAR-33MAA

Comments to this Manuals

Symbols: 0
Latest comments:
  • Bourgeois Nov 27, 2019 05:13:
    peut ont régler la seensibili​té de la sonde de températu​re sur la commande par 33 celle ci éant fausse e quelque dixieme la mise en route s;effectue trop tardivemen il fau atendre quelle descende trop lomptemp