Seasonal Airflow Function - Mitsubishi Electric PAR-33MAA Manual

MA REMOTE CONTROLLER

3.4. Seasonal airflow function

Button operation
[ 1 ]
Seasonal airflow
Seasonal airflow
Cooling/Heating
Select:
F1 F2 F3
D-48
Select "Maintenance" from the Main menu (refer to D-15), and press
the button.
Select "3D i-See sensor" with the F1 or F2 button, and press the
ton.
F4
Select "Seasonal airflow" with the F1 or F2 button, and press the
button.
Select the setting with the F4 button.
OFF → Cooling only → Heating only → Cooling/Heating → OFF...
After changing the setting, press the
OFF: The function is disabled.
Cooling only: When the thermostat turns off during cooling mode, the
vanes move up and down.
Heating only: When the thermostat turns off during heating mode, the
vanes move to the horizontal airflow direction to circulate the air.
Cooling/Heating: The function is enabled during both cooling mode and
heating mode.
* In order to enable this function, the airflow direction must be set to "Auto".
button to save the setting.
but-