Download  Print this page

Advertisement

Functions
Basic Functions
▪ ON/OFF ▪ Operation mode switching ▪ Room temperature setting/display ▪ Fan speed setting
▪ Vane setting ▪ Louver setting ▪ Clock setting/display ▪ Filter information display
Advanced Functions
Display mode switching
Error information
Ventilation equipment
control
High power
Auto descending panel
Timer
Weekly timer
Energy saving
Operation lock
Temperature range
restriction
Password
Language selection
Contrast
Manual vane angle
The main display can be displayed in two different modes: "Full" and "Basic".
Error code, error unit, unit address, unit model, serial number, contact information (dealer's
phone number) can be displayed.
* The unit model, serial number, and contact information need to be registered in advance
to be displayed.
* The unit address may not be displayed depending on the error type.
Interlock settings and interlock operation settings for Lossnay units can be made.
OFF/High/Low can be switched.
The units operate at higher-than-normal capacity for up to 30 minutes.
The automatic descending panel can be operated.
* Valid only for the indoor units that are compatible with this function.
On/Off timer: The unit automatically turns on or off at the preset time.
• Time can be set in 5-minute increments.
• It is possible to set only the time when the unit turns on or when the unit turns off.
Auto-Off timer: The unit automatically stops after the preset time has elapsed.
• Time can be set to a value from 30 to 240 in 10-minute increments.
ON/OFF and temperature setting can be scheduled for each day.
• Up to eight operation patterns can be set for each day.
• Time can be set in 5-minute increments.
* Not valid when the On/Off timer is enabled.
The start/stop times to operate the units in the energy-save mode for each day of the week,
and the energy-saving rate can be set.
• Up to four energy-save operation patterns can be set for each day.
• Time can be set in 5-minute increments.
• Energy-saving rate can be set to a value from 0% and 50 to 90% in 10% increments.
Settings including ON/OFF, Operation mode, Set temp. and Vane can be locked.
The lower limit and the upper limit of the settable temperature in each operation mode can
be limited.
Administrator password (required for schedule setting) and Maintenance password (required
for test run and function setting) can be set.
Language to be displayed on the screen can be selected from eight languages: English,
French, German, Spanish, Italian, Portuguese, Swedish, and Russian.
Screen contrast can be adjusted.
The vane angle can be set to a fixed position.
* Valid only for the indoor units that are compatible with this function.
MA REMOTE CONTROLLER
D-3

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric PAR-33MAA

Comments to this Manuals

Symbols: 0
Latest comments: