Download  Print this page

Icon Explanations; Restrictions For The Sub Remote Controller - Mitsubishi Electric PAR-33MAA Manual

Hide thumbs

Advertisement

MA REMOTE CONTROLLER
Maintenance
Auto descending panel operation
Clock
Language selection
Night setback
Smooth maintenance
Refrigerant leak check
Support
Contact information (Manual entry)
Model name
Serial No (Manual entry)

4. Icon explanations

Controller operation
Timer
The administrator password must be entered on the password input screen to change settings.
There is no settings that can skip this process.
P
Timer
Enter administrator password
Select:
Cursor
F1
F2
Indicates settings that can be changed only while
the units are in operation.
ON
Indicates settings that can be changed only while
the units are operated in the Cool, Heat, or Auto
mode.

5. Restrictions for the sub remote controller

Main
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display:
Cursor
Page
D-10
Function
F1 : Press to move the cursor left.
F2 : Press to move the cursor right.
F3 : Press to decrease the value by 1.
F4 : Press to increase the value by 1.
*Changes cannot be made unless the correct password is entered.
F3
F4
The following settings cannot be made from the sub remote controller.
Make these settings from the main remote controller. "Main" is displayed
in the title of the Main menu on the main remote controller.
• Timer (On / Off timer, Auto-Off timer)
• Weekly timer
• OU silent mode
• Energy saving (Auto return, Schedule)
• Night setback
• Maintenance (Manual vane angle)
Slim
The table below summarizes the square
P
icons used in this manual.
Indicates settings that can be changed only while
the units are not in operation.
OFF
Indicates functions that are not available when the
buttons are locked or the system is centrally con-
trolled.
PAR-33MAA
City multi
Main
Indicates set-
tings that can
be made only
from the main
remote control-
ler.

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric PAR-33MAA

Comments to this Manuals

Symbols: 0
Latest comments: