Auto-Off Timer - Mitsubishi Electric PAR-33MAA Manual

5. Timer

5.2. Auto-OFF timer

Button operation
[ 1 ]
Timer
On/Off timer Yes
On Off
Repeat No
Auto-Off No
Stop in --- min
Setting display:
Cursor
F1 F2 F3
[ 2 ]
Auto-Off timer
Auto-Off No Yes
Stop in min
Select:
Cursor Cursor
[ 3 ]
Auto-Off timer
Auto-Off No Yes
Stop in min
Select:
Cursor
F1 F2 F3
Bring up the Timer setting screen. (Refer to D-19)
Select "Auto-Off", and press the
F4
The Auto-Off timer will not work in the following cases:
when Auto-Off timer is disabled, during an error, during check (in the service
menu), during test run, during remote controller diagnosis, when the clock is
not set, during Function setting, when the system is centrally controlled (when
On/Off operation from local controller is prohibited).
The current settings will appear.
Move the cursor to the "Auto-Off" or "Stop in --- min" with the F1 or F2
button.
Change the setting with the F3 or F4 button.
• Auto-Off : No (disable) / Yes (enable)
• Stop in --- min : Timer setting
Time
F4
button.
(The settable range is 30 to 240 minutes in 10-minute incre-
ments.)
MA REMOTE CONTROLLER
P
Main
D-21