MA REMOTE CONTROLLER
3.2. Air distribution
[ 1 ]
3D i-See sensor
Energy saving option
[ 2 ]
Identify unit Check button
Select "Maintenance" from the Main menu (refer to D-15), and press
Select "3D i-See sensor" with the F1 or F2 button, and press the
Select "Air distribution" with the F1 or F2 button, and press the
Move the cursor to "Ref. address", "Unit No." or "Operation" with the F1
button to select.
Select the refrigerant address and the unit number for the units to whose
vanes are to be fixed, with the F2 or F3 button, and press the
• Ref. address: Refrigerant address
• Unit No.: 1, 2, 3, 4
Press the F4 button to confirm the unit.
<Confirmation of target unit>
If the unit being set is unknown, make the setting and then press the F4 but-
ton to confirm.
The air conditioner which is blowing downward is the target air conditioner.
The vane of only the target indoor unit is pointing downward.