Mitsubishi Electric PAR-33MAA Manual page 71

[ 4 ]
Lossnay
IU address
Lossnay address
Sending data
Lossnay
IU address
Lossnay address
Setting completed
Return:
[ 5 ]
Lossnay
IU address
Lossnay address
Collecting data
Lossnay
IU address
Lossnay address
Unit not exist
Return:
[ 6 ]
Lossnay
IU address
Lossnay address
Deleting
Lossnay
IU address
Lossnay address
Request rejected
Return:
To make LOSSNAY interlock setting
Enter the addresses of the indoor unit and the LOSSNAY unit to be inter-
locked, with the F1 through F4 buttons, select "Set" in the "Function",
and press the button to save the settings.
"Sending data" will appear on the screen.
If the setting is successfully completed, "Setting completed" will appear.
To search for the LOSSNAY address
Enter the address of the indoor unit to which the remote controller is con-
nected, select "Conf" in the "Function", and press the
"Collecting data" will appear on the screen. If the signal is received correctly,
the indoor unit address and LOSSNAY address will appear. "--" will appear when
no LOSSNAY unit is found. "Unit not exist" will appear if no indoor units that are
correspond to the entered address are found.
To delete the interlock setting
To delete the interlocked setting between LOSSNAY unit and the indoor
units
to which the remote controller is connected, enter the indoor unit address
and LOSSNAY address with the F1 through F4 buttons, select "Del." in
the "Function", and press the
The screen will return to the search result screen if the deletion is successfully
completed. "Unit not exist" will appear if no indoor units that are correspond to
the entered address are found. If deletion fails, "Request rejected" will appear on
the screen.
MA REMOTE CONTROLLER
button.
button. "Deleting" will appear.
D-71