Manual Vane Angle - Mitsubishi Electric PAR-33MAA Manual

2. Manual vane angle

Applies to the of Ceiling cassette type.
Use to set the vane angle for each vane to a fixed position.
Button operation
[ 1 ]
Main Main menu
Maintenance
Initial setting
Service
Main display:
Cursor
[ 2 ]
Maintenance menu
Auto descending panel
Manual vane angle
3D i-See sensor
Main menu:
Cursor
[ 3 ]
Manual vane angle
Ref. address
Unit No.
Identify unit Check button
Input display:
Cur. Address
Manual vane angle
Ref. address
Unit No.
Function setting for unit
with vane fully open.
Return:
Select "Maintenance" from the Main menu (refer to D-15), and press
the button.
Page
Select "Manual vane angle" with the F1 or F2 button, and press the
button.
Move the cursor to "Ref. address", "Unit No." or "Operation" with the F1
button to select.
Select the refrigerant address and the unit number for the units to whose
Check
vanes are to be fixed, with the F2 or F3 button, and press the
• Ref. address: Refrigerant address
• Unit No.: 1, 2, 3, 4
Press the F4 button to confirm the unit.
<Confirmation of target unit>
If the unit being set is unknown, make the setting and then press the F4 but-
ton to confirm.
The air conditioner which is blowing downward is the target air conditioner.
The screen at left shows a sample display on Mr. Slim. On City Multi
units, "M-NET address," is displayed instead of "Ref. address", and the
"Unit No." will not be displayed.
MA REMOTE CONTROLLER
OFF
Main
button.
D-41