Mitsubishi Electric PAR-33MAA Manual page 36

MA REMOTE CONTROLLER
Room
Cool Set temp.
Mode Temp.
D-36
Fri
will appear on the Main display in the Full mode when
the Night setback function is enabled.
Auto
appears when the timer is disabled by the
centralized control system.
Fan
The Night setback will not work in the following cases:
when the unit is in operation, when the Night setback
function is disabled, during an error, during check (in the
service menu), during test run, during remote controller di-
agnosis, when the clock is not set, during Function setting,
when the system is centrally controlled (On/Off operation
or temperature setting from local controller is prohibited).