5.2. City Multi
[ 1 ]
Input maintenance info.
[ 2 ]
[ 3 ]
Select "Service" from the Main menu (refer to D-15), and press the
Select "Function setting" with the F1 or F2 button, and press the
The Function Setting screen will appear.
Press the F1 or F2 button to move the cursor to one of the following:
M-NET address, function setting number, or setting value.
Then, press the F3 or F4 button to change the settings to the desired
Once the settings have been completed, press the
A screen will appear that indicates that the settings information is being
To check the current settings of a given unit, enter the setting for its M-NET
address and function setting number, select Conf for the Function, and press
A screen will appear that indicates that the settings are being searched for.
When the search is done, the current settings will appear.
When the settings information has been sent, a screen will appear that indi-
cates its completion.
To make additional settings, press the
shown in Step 3 above. Set the function numbers for other indoor units by
following the same steps.
Navigating through the screens
• To return to the Service Menu screen ..........
• To return to the previous screen .......
MA REMOTE CONTROLLER
button to return to the screen