Using The Weekly Timer - Mitsubishi Electric PAR-33MAA Manual

WIRELESS REMOTE CONTROLLER
4.6.

Using the weekly timer

0
1
3
2
B
C
A
Fig. 4-1
D
Fig. 4-2
Fig. 4-3
Fig. 4-4
E
Fig. 4-5
D-100
• This function cannot be operated depending on the model of the indoor
unit.
• The weekly timer can be set to 4 operation patterns for each day of the
week.
• The settings include the on and off times and the set temperature.
• The operation time can be set in 10-minute increments.
<Switching to the editing mode>
Press the
• C blinks. (Fig. 4-1)
<Selecting the setting pattern>
Press the
• Each time the
in the following order: 1 → 2 → 3 → 4. (Fig. 4-1)
<Selecting the day of the week>
Press the
• Each time the
9
in the following order: Mon → Tue → Wed → Thu → Fri → Sat → Sun
7
→ All days. (Fig. 4-1)
5
<Selecting the operation settings>
6
1. Press the
8
• D (
4
• Each time the
D and
2. Press the
• The operation time blinks. (Fig. 4-3)
• Press the
3. Press the
• The set temperature blinks. (Fig. 4-4)
• Press the
• When the AUTO (dual set point) mode is enabled, press the
button 6 to switch between the upper limit E and the lower limit F.
(Fig. 4-5)
* When setting the off operation, the temperature cannot be set.
<Deleting the settings>
Press the
• The displayed day of the week and the pattern number settings are
deleted.
<Transmitting the settings>
Point the transmission area of the wireless remote controller towards
the receiver on the indoor unit and operate the controller.
Confirm that the indoor unit beeps 7 times.
Press the
<Enabling the weekly timer>
Point the transmission area of the wireless remote controller towards
the receiver on the indoor unit and operate the controller.
Press the
The weekly timer operates when
• The weekly timer does not function when the on/off timer is enabled.
• The weekly timer operates when all of the on/off timer settings have
been executed.
F
button 1.
button 2.
button 2 is pressed, the pattern number A changes
button 3.
button 3 is pressed, the day of the week B changes
button 4.
) appears. (Fig. 4-2)
button 4 is pressed, the setting switches between
.
button 5.
button 7 to set the operation time.
button 6.
button 7 to set the temperature.
button 8.
button 9.
button 0.
is on.