Operation Lock Function - Mitsubishi Electric Mr.Slim MA Series Manual

7. Restriction

7.2. Operation lock function

• To enable the operation lock function, set the item "Operation locked" to "Yes".
• The On / Off operation, Operation mode setting, Preset temp, Setting and Vane Setting operations can all be restricted.
Button operation
[ 1 ] Restriction
Restriction
Operation locked No
On/Off Mode Set temp.
Operation locked No
On/Off Mode Set temp.
Vane Menu
Louver
Vane Menu
Louver
Setting display:
Setting display: Page
Page
F1 F2 F3
[ 2 ]
Restriction
Operation locked No / Restriction
Location
Indiv.
Operation locked No /
On/Off
-/Locked
Location
Indiv.
Mode
-/Locked
On/Off
-/Locked
Set temp. -/Locked
Mode
-/Locked
Set temp.
-/Locked
Select:
Select:
Cursor
Cursor
F1 F2 F3
Restriction
Restriction
Operation locked
On/Off Mode Set temp.
Operation locked
Menu
On/Off Mode Set temp.
Vane
Menu
Louver
Vane
Changes saved
Louver
Changes saved
Main menu:
Main menu:
Room
Cool Set temp.
Mode
(When Set temp. is locked)
Bring up the Restriction setting screen. (refer to D-29)
Fan
Move the cursor to "Operation locked" and press the SELECT button.
Fan
F4
The screen to make the settings for the operation lock function will appear.
Yes
/Hotel Move the cursor to the desired item with the F1 or F2 button out of "Op-
Yes
/Hotel
eration locked", "Location", "On / Off", "Mode", "Set temp.", "Menu",
"Fan", "Louver", or "Vane".
Cursor
Change the settings with the F3 or F4 button.
Cursor
• Operation locked: No (disable) / Yes (enable)
F4
• Location: "Individual" or "Hotel"
• On / Off: On/Off operation
• Mode: Operation mode setting
• Set temp.: Preset temp. setting
• Vane: Vane setting
• Menu: Menu setting
• Fan: Fan speed setting
• Louver: Louver setting
Yes
Yes
When "Hotel" is selected for the "Location" setting,the following operations will be
Fan
locked automatically:Mode, Vane, Menu, and Louver.
Fan
Press the SELECT button to save the settings.
A confirmation screen will appear.
Navigating through the screens
• To go back to the Main menu .................. MENU button
• To return to the previous screen ............... RETURN button
will appear on the Main display in the Full mode when the operation lock
Fri
function setting is enabled.
Operation guide that corresponds to the locked function will be suppressed.
Auto
Fan
To display the main menu while the menu setting is being locked, press and hold
the Menu button for ten or more seconds.
Enter the administrator's password on the password input screen.
MA REMOTE CONTROLLER
– / Locked
P
D-31