Download  Print this page

Auto Mode Setting - Mitsubishi Electric PAR-33MAA Manual

Hide thumbs

Advertisement

6. Auto mode setting

Whether or not to use the Auto (single set point) or Auto (dual set points) mode can be selected by using the F3 or F4 but-
ton.
Button operation
[ 1 ]
Initial setting menu
Auto mode
Administrator password
Language selection
Daylight saving time
Main menu:
Cursor
Page
F1
F2
F3
[ 2 ]
Auto mode
Auto mode
Yes
/ No
Select:
Cursor
F1
F2
F3
Select "Initial setting" from the Main menu (refer to D-15), and press
the
button.
Move the cursor to the "Auto mode" with the F1 or F2 button, and press
the
button.
F4
Change the setting with the F3 or F4 button.
Press the
Auto mode setting : The factory default setting is "Yes".
• Yes:
The AUTO mode can be selected in the operation mode setting.
• No:
The AUTO mode cannot be selected in the operation mode setting.
F4
button to save the changes mode.
Navigating through the screens
• To go back to the Main menu ..................
• To return to the previous screen ...............
MA REMOTE CONTROLLER
P
button
button
D-55

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric PAR-33MAA

Comments to this Manuals

Symbols: 0
Latest comments: