Energy Saving Option - Mitsubishi Electric PAR-33MAA Manual

MA REMOTE CONTROLLER

3.3. Energy saving option

Button operation
[ 1 ]
Energy saving option
No occupancy energy save
Room occupancy energy save
No occupancy Auto-OFF
Setting display:
Cursor
F1 F2 F3
[ 2 ]
Energy saving option
No occupancy energy save
Cooling/Heating
Select:
F1 F2 F3
D-46
Select "Maintenance" from the Main menu (refer to D-15), and press
the button.
Select "3D i-See sensor" with the F1 or F2 button, and press the
ton.
F4
Select "Energy saving option" with the F1 or F2 button, and press
the button.
Select the desired menu with the F1 or F2 button.
• No occupancy energy save
If there are no persons in the room for 60 minutes or more, energy-saving
operation equal to 2 °C is performed.
• Room occupancy energy save
If the occupancy rate decreases to approximately 30% of the maximum
occupancy rate, energy-saving operation equal to 1 °C is performed.
• No occupancy Auto-OFF
If there are no persons in the room for the set amount of time (60–180 min-
utes), the operation is automatically stopped.
When No occupancy energy save or Room occupancy energy save is se-
lected.
Select the setting with the F4 button.
OFF → Cooling only → Heating only → Cooling/Heating → OFF...
After changing the setting, press the
F4
button to save the setting.
but-