Names And Functions Of Controller Components - Mitsubishi Electric PAR-33MAA Manual

3 . Names and functions of controller components

Display
The main display can be displayed in two different modes: "Full" and "Basic".
The factory setting is "Full". To switch to the "Basic" mode, change the setting on the Main display setting.
<Full mode>
* All icons are displayed for explanation.
2 3 4 5 6
Centrally controlled
#
6
7
8
Room
9
0
Cool Set temp.
1
1
Mode
!
1 Operation mode
Indoor unit operation mode appears here.
2 Preset temperature
Preset temperature appears here.
3 Clock
(See the Installation Manual.)
Current time appears here.
4 Fan speed
Fan speed setting appears here.
5 Button function guide
Functions of the corresponding buttons appear
here.
6
Appears when the ON/OFF operation is centrally
controlled.
7
Appears when the operation mode is centrally
controlled.
8
Appears when the preset temperature is centrally
controlled.
9
Appears when the filter reset function is centrally
controlled.
0
Indicates when filter needs maintenance.
1 Room temperature
(See the Installation Manual.)
Current room temperature appears here.
2
Appears when the buttons are locked.
Most settings (except ON/OFF, mode, fan
speed, temperature) can be made from
the Main menu. (Refer to D-15.)
7 8
Fri
3
9
@
)
Auto
4
Temp. Fan
2
5
<Basic mode>
Centrally controlled
#
Cool Set temp.
1
Mode Temp.
3
Appears when the On/Off timer (D-19),
Night setback (D-35), or Auto-off timer
(D-21) function is enabled.
appears when the timer is disabled by the
centralized control system.
4
Appears when the Weekly timer is enabled.
5
Appears while the units are operated in the
energy-save mode. (Will not appear on some
models of indoor units)
6
Appears while the outdoor units are operated in
the silent mode.
7
Appears when the built-in thermistor on the
remote controller is activated to monitor the
room temperature ( ).
1
appears when the thermistor on the
indoor unit is activated to monitor the room
temperature.
8
Indicates the vane setting.
9
Indicates the louver setting.
)
Indicates the ventilation setting.
!
Appears when the preset temperature range is
restricted.
@
Appears when an energy-saving operation is
performed using a "3D i-See sensor" function.
# Centrally controlled
Appears for a certain period of time when a
centrally-controlled item is operated.
MA REMOTE CONTROLLER
(Refer to D-51)
2
Fri
3
Auto
4
Fan
5
D-5