5.1. ON / OFF timer
The unit automatically turns on or off at the preset time.
(ex. Operation start time PM 2:30/ Operation stop time AM 12:50/ only one)
[ 1 ]
OU silent mode
[ 2 ]
[ 3 ]
Select "Timer" from the Main menu (refer to D-15), and press the
The On/Off timer will not work in the following cases:
when On/Off timer is disabled, during an error, during check (in the service
menu), during test run, during remote controller diagnosis, when the clock is
not set, during Function setting, when the system is centrally controlled (when
On/Off operation from local controller is prohibited).
The current settings will appear.
Move the cursor to the On / Off timer, and press the
The screen to set the timer will appear.
Select the desired item with the F1 or F2 button out of "On / Off timer",
"On", "Off" or "Repeat".
MA REMOTE CONTROLLER