3. Main display
[ 1 ]
Initial setting menu
[ 2 ]
This setting is only for the Main Display. In the Basic mode, icons that indicate control status on timer and schedule settings
will not appear on the display. Vane, louver, and ventilation settings or room temperature will not appear, either.
Select "Initial setting" from the Main menu (refer to D-15), and press
Move the cursor to the "Main display" with the F1 or F2 button, and
Select "Full" or "Basic" with the F3 or F4 button, and press the
ton. (The factory setting is "Full")
A confirmation screen will appear.
Navigating through the screens
• To go back to the Main menu ..................
• To return to the previous screen ...............
MA REMOTE CONTROLLER