Download  Print this page

Advertisement

MA REMOTE CONTROLLER
[ 4 ]
Manual vane angle
Select:
Outlet
Angle
F1
F2
F3
Manual vane angle
Setting
*Draft reduction
The [Draft reduction] mode keeps the vane angle more horizontal than the angle of Step 1 so that the airflow will not
be directed toward the people.
This function can be set only for one outlet.
This function cannot be set for models with two or three outlets.
In the Draft reduction mode, the airflow may cause the ceiling discoloration.
D-42
The current vane setting will appear.
Select the desired outlets from 1 through 4 with the F1 or F2 button.
• Outlet: "1," "2," "3," "4," and "1, 2, 3, 4, (all outlets)"
Press the F3 or F4 button to go through the option in the order of "No
setting (reset)," "Step 1," "Step 2," "Step 3," "Step 4," "Step 5," and "Step 6."
Select the desired setting.
F4
*Step 6 can only be set for one outlet.
<Vane setting>
No setting
Step 3
Draft
reduction*
Press the
A screen will appear that indicates the setting information is being transmitted.
The setting changes will be made to the selected outlet.
The screen will automatically return to the one shown above (step 4) when the
transmission is completed.
Make the settings for other outlets, following the same procedures.
If all outlets are selected,
goes into operation.
Step 1
Step 2
Step 4
Step 5
All outlets
button to save the settings.
will be displayed the next time the unit
Navigating through the screens
• To return to the previous screen ...............
* Draft reduction
The airflow direction for this
setting is more horizontal
than the airflow direction for
the "Step 1" setting in order
to reduce a drafty feeling.
The draft reduction can be
set for only 1 vane.
button

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric PAR-33MAA

Comments to this Manuals

Symbols: 0
Latest comments: