Hantek 1060 User Manual page 89

Making an AC Voltage Measurement
To measure the AC voltage, do the following:
1) Press the V key and DC appears on the screen.
2) Press the F1 key and AC appears on the screen.
3) Insert the black lead into the COM banana jack input and the red lead into the V/Ω/C
banana jack input.
4) Connect the red and black leads to the measured points and the AC voltage value of
measured points will be displayed on the screen.
Then, the screen will look like the following figure 4-7.
Figure 4-6 DC voltage Measurement

DSO1000 SERIES
HANDHELD OSCILLOSOPE