Chapter 7: Appendix - Hantek 1060 User Manual

1060/1200/1600/1600H

Chapter 7: Appendix

Appendix A: Accessories
1) Probe×2 (1.2m), 1:1, (10:1) Passive Probes
2) A Power Adapter that fits the standard of destination country
3) A User's Guide
4) A User Registration Form
5) A User Warranty Card
6) A Software CD
Appendix B: Warranty
We warrant our products' mainframe and accessories in materials within the warranty
period. During the period concerned,
We guarantee the free replacement or repair of products which are approved defective.
To get repair service or obtain a copy of the whole warranty statement, please contact
with your nearest sales and service office.
We do not provide any other warranty items except the one being provided by this sum-
mary and the warranty statement. The warranty items include but not being subjected to
the hinted guarantee items related to tradable characteristic and any particular purpose.
We will not take any responsibility in cases regarding to indirect, particular and ensuing
damage.
Appendix C: Maintenance
General Care
Do not store or leave the instrument in where the LCD display will be exposed to direct
sunlight for long periods of time.
Caution: To avoid damage to the instrument or probes, do not expose them to sprays,
liquids, or solvents.
Cleaning
If this instrument requires cleaning, disconnect it from all power sources and clean it with
a mild detergent and water. Make sure the instrument is completely dry before recon-
necting it to a power source.
To clean the exterior surface, perform the following steps:
1) Remove loose dust on the outside of the instrument and probes with a lint- free cloth.
Take care to avoid scratching the clear plastic display filter.
2) Use a soft cloth dampened with water to clean the instrument.
Notice: To avoid damage to the surface of the instrument or probes, do not use any
abrasive or chemical cleaning agents.
Storage of oscilloscope
If the test tool is to be stored for a long time, it is required to charge the lithium battery
00