Using The Ll Ll - Hantek 1060 User Manual

1060/1200/1600/1600H
Using the Oscilloscope
This part provides a step-by-step introduction to the scope functions. The introduction
does not cover all of the capabilities of the scope functions but gives basic examples to
show how to use the menus and perform basic operations.
Turn on the oscilloscope
Connect ll to AC power via a power adapter. (The ll can still work
with built-in Li-ion battery even without AC power supply.)
Turn the ll on by pressing down the power on/off key.
The instrument then performs Self-checking after power on. The welcome picture will
display on the screen when the system finishes Self-checking.
The ll is powered up in its last setup configuration.
Figure 1-6 The Login window
Menu Operation
The following example shows how to use the tools menus to select a function, as shown
in the following figure.