Io Set - Hantek 1060 User Manual

1060/1200/1600/1600H
Please do the following steps:
1. Select menu Mode->Track.
2. Select Source for measurements. Select options as followings.
Cursor A->CH1/CH2. Cursor B->CH1/CH2.
3. Select Cursor A or Cursor B. Move the Select Cursors to adjust the increments
between the Cursors.
4. Get the values between Cursor A and Cursor B.
delt x is the time between Cursor A and Cursor B.1/(delt x) is the frequency between
Cursor A and Cursor B.delt y is the voltage between the Cursor A and Cursor B.

IO Set

→ F5 → F5→ F5 → F5→ F2
Press UTILITY
The IO Set menu (LAN)
Figure 2-62 Track Cursor Mode
0
button to show the menu of IO Set