Hantek 1060 User Manual page 39

center.
Horizontal position changes the displayed waveform position, relative to the trigger point.
Press HORI button to show the horizontal system menu. The settings of this menu are
listed in the following table.
The Horizontal Menu
The Horizontal Menu Table
Menu
Time base
Reset
ALT Mag
Holdoff
1. TIME/DIV
Use this button to select the horizontal time/div (scale factor) for the main.
2. POSITION
Press this button to adjust the horizontal position of all channel waveforms. The
resolution of this control varies with the time base.
Figure 2-20 The Horizontal menu
Setting
Y – T Show the relative relation between vertical voltage and
horizontal time.
X – Y Show CH1 value at X axis; CH2 value at Y axis.
In Roll Mode, the waveform display updates from right to
Roll left.
Pressing this button clears trigger offset and moves the
trigger point to the horizontal center of the screen.
ON Turn on ALT Mag
OFF Turn off ALT Mag
ON Turn on the Holdoff time
OFF Turn off the Holdoff time
Figure 2-21 The TIME/DIV button
Figure 2-22 The POSITION button
DSO1000 SERIES
HANDHELD OSCILLOSOPE
Description