Set Trigger System - Hantek 1060 User Manual

1060/1200/1600/1600H
horizontal axis (X) and CH2 in the vertical axis (Y)
The following modes or functions will not work in X-Y format.
■
Automatic Measurements
■
Cursor Measurements
■
REF and MATH Operations
■
Horizontal Position
■
Trigger Controls

Set Trigger System

The trigger determines when the
waveform. When a trigger is set up properly, it can convert unstable displays or blank
screens into meaningful waveforms.
When the ll
draw the waveform to the left of the trigger point. The
data while waiting for the trigger condition to occur. After it detects a trigger, the
continues to acquire enough data so that it can draw the waveform to the right of
the trigger point.
Figure 2-25 X-Y display format
ll
starts to acquire a waveform, it collects enough data so that it can
0
starts to acquire data and display a
ll continues to acquire
ll