Hantek 1060 User Manual page 47

11. The trigger level of CH2
12. The trigger delay time of CH2
13.The CH1 Voltage/Div
14.The CH2 Voltage/Div
The Alternative menu table (Type edge)(Page 2/2)
Menu Setting
2/2
HF Reject
50%
2/2
The ALT Trigger menu (Type Pulse)(Page 1/2)
The Alternative menu table (Trigger Type: Pulse Page 1/2)
Menu Setting
Channel
Type
Pulse
Figure 2-31 The ALT Trigger menu
Back to the previous menu page
ON
Reject high frequency signals or not
OFF
Set the trigger level to the center of the signal
Back to the previous menu page
Figure 2-32 The ALT Tirgger menu
CH1 Set trigger mode for CH1
CH2 Set trigger mode for CH2
Edge
Set Edge/Pulse Trigger as the trigger type
DSO1000 SERIES
HANDHELD OSCILLOSOPE
Description
Description