Hantek 1060 User Manual page 85

Making a Diode Measurement
To make a measurement on the diode, do the following:
1) Press the diode key and a diode symbol appears at the top of the screen.
2) Insert the black lead into the COM banana jack input and the red lead into the V/Ω/C
banana jack input.
3) Connect the red and black leads to the diode and the voltage value of the diode is
displayed on the screen in volt.
Then, the screen will look like the following figure 4-3.
Figure 4-2 Resistance Measurement

DSO1000 SERIES
HANDHELD OSCILLOSOPE
.