1060/1200/1600/1600H
3/5
The Utility menu table (Page 4/4 and Page 4/5)
Menu
4/4
4/5
Configure
Update
System Info
4/4
4/5
The Utility menu table (Page 5/5)
Menu
Setting
5/5
IO Set
5/5
Calibrate
The calibration adjusts the internal circuitry to get the best accuracy. Use these functions
to calibrate the vertical and horizontal systems.
For maximum accuracy at any time, run this calibration if the ambient temperature
changes by 5°C or more.
Before running this procedure, do these steps:
1. Disconnect any probes or cables from all channel inputs, otherwise failure or damage
to the
ll
Utility
2. Push the
Go to the next menu page
Setting
Back to the previous menu page
Back to the previous menu page
Not save the system configuration when shut down
No Save
Save the system configuration when shut down
Save
Update the system
Show the information of the system
Go to the first previou menu page
Go to the next menu page
Description
Back to the previous menu page
Go to the IO Set menu Page
Go the the first previous menu page
may be occurred.
Calibrate.
button and select
Description