Hantek 1060 User Manual page 48

1060/1200/1600/1600H
When
1/2
The ALT Trigger menu (Type Pulse)(Page 2/2)
The Alternative menu table (Trigger Type: Pulse Page 2/2)
Menu
2/2
Setting
HF Reject
50%
2/2
Video Trigger Setting
The Video trigger mode is designed to captrue the video signal type to display stable
NTSC or PAL/SECAM standard composite video waveforms.
TRIG → F1 → Video
Press
table.
The Video Trigger menu (Page 1/2)
+More +Pulse width more than selecting pulse condition
+Less +Pulse width less than selecting pulse condition
+Equal +Pulse width equal to selecting pulse condition
-More -Pulse width more than selecting pulse condition
-Less -Pulse width less than selecting pluse condition
-Equal -Pulse width equal to selecting pulse condition
Go to the next menu page
Figure 2-33 The ALT Trigger menu
Setting
Back to the previous menu page
Value
Set the width of the pulse
ON
Reject high frequency signals or not
OFF
Set the trigger level to the center of the signal
Back to the previous menu page
button to show the Video trigger menu as the following
Description