Hantek 1060 User Manual page 103

DSO1000 SERIES
HANDHELD OSCILLOSOPE
before storage.
Charging the ll
The lithium battery is possibly not charged when delivery. To make the battery with
enough electric quantity, it must be charged for 4 hours (the test tool must be turned off
during charging). The battery can supply power for 6 hours after being charged com-
pletely.
To avoid superheat of battery during charging, the environment temperature is not al-
lowed to exceed the permissible value given in technical specification.
Note:
No hazard will occur even connecting the charger for a long time, e.g. during a whole
weekend. The instrument can automatically switch to slowly charging status.
Replacing the Lithium Battery Unit
It is usually not required to replace the battery unit. But when it is required to replace it,
only qualified personnel can carry out this operation, and only use the same specification
lithium battery.
0