Hantek 1060 User Manual page 70

1060/1200/1600/1600H
Figure 2-60 The Automatic Cursor Mode
2. Manual Cursor Mode
In this mode, the ll measures the Y or X coordinate increments between the
two cursors. See figure 2-61.
1) Select menu Mode->Manual.
2) Select menu Type->X/Y to get the vertical or horizontal of Cursor A or Cursor B.
3) Select menu Source->CH1/CH2/MATH to Get the Cursor Source.
4 )Select Cursor A or Cursor B to adjust the increments between Cursor A and Cursor B.
5) Get the values between Cursor A and Cursor B.
delt x is the time between Cursor A and Cursor B.
1/(delt x) is the frequency between Cursor A and Cursor B.