Hantek 1060 User Manual page 19

DSO1000 SERIES
HANDHELD OSCILLOSOPE
Figure 1-7 The Menu
MENU ON/OFF
1. Press the key to display the Function Menu on the bottom of the
MENU ON/
screen and the corresponding optional settings on the bottom. Press
OFF
again to hide the Function Menu.
F1 F5
2. Choose one key from to and press it to change function setting.
Set up the vertical system
1. Change the vertical setup and notice that each change affects the
status bar differently.
■
Change the vertical sensitivity with or button and notice the change in the
status bar.
2. Move the signal vertically.
■
The / button moves the signal vertically. Also notice that the channel symbol
on the left side of the display moves in conjunction with the button.
To set up the horizontal system
1. Change the time base.