Creating A Project - Mitsubishi Electric MELSEC iQ-R Series Quick Start Manual

Creating a project

Starting CW Workbench
Operating procedure
1.
Select [Start]  [All Programs]  [Wind River]  [CW Workbench 3.3]  [CW Workbench 3.3].
2.
After CW Workbench is started, enter the save destination folder for a project.
In this procedure, enter 'C:\WindRiver\workspace'.
3.
Click the [OK] button.
The main window of CW Workbench appears.
• The default window sizes and icon positions on CW Workbench depends on a personal computer. If a
window size differs from that shown in this guide, adjust the size.
• To default an enlarged/deleted window, select [Window]  [New Window].
2 USING C CONTROLLER MODULE
2.5 Programming
2
25