9.2
DP-Master settings
Connect the GX Works3 to the CPU module of the DP-Master, and set the parameters.
Create a new project
1.
Set the CPU module as follows.
[Project] [New]
2.
Click the [OK] button to add the module label of the CPU module.
3.
Set the FX5-DP-M as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
4.
To enable the data consistency function, set the items in "Basic Setting" as follows.
[Navigation window] [Parameter] [Module Information] [FX5-DP-M] [Module Parameter] [Basic Setting]
9 PROGRAMMING
95
9.2 DP-Master settings
9