Mitsubishi Electric FX5-DP-M User Manual page 79

Slave Status
Checks the communication status of the PROFIBUS-DP network.
All the device addresses in the PROFIBUS-DP network are displayed, and the DP-Slave statuses are indicated by
corresponding colors.
Item Description
0 to 125 Displays the DP-Slave status.
Number shown in each cell is a FDL address.
• Light gray: This FDL address is unused.
• Dark gray: This DP-Slave is set as a reserved station.
• Yellow: This DP-Slave has diagnostic information.
• Green: Data exchange is in progress.
• Red: Data exchange with the slave station has failed. Diagnostic information may be displayed in the "PROFIBUS Diagnosis" window.
By double-clicking a colored rectangle, the detailed information is displayed in a tooltip.
Cycle time Displays the bus cycle time. (Unit: ms)
• Now: Current bus cycle time value
• Min: Minimum bus cycle time value
• Max: Maximum bus cycle time value
Start Starts refresh of the window.
Stop Stops refresh of the window.
8 PROFIBUS Configuration Tool
8.2 "PROFIBUS Configurator Tasks" Window
8
77