Version - Mitsubishi Electric FX5-DP-M User Manual

Item Description
Value Displays the value of the monitor target data in the data type selected for "Value format".
When the buffer memory value is changed during monitoring, the value is displayed in red bold font.
To enter a value, double-click a cell while the monitoring is stopped.
To apply the changes to the buffer memory, click the [Write] button.
Upon applying the changes to the buffer memory of the master module, the bold font returns to the regular font.
During monitoring, values that have been changed since the first update are displayed in red bold font.
When the monitoring is stopped, values remain highlighted until the monitoring is resumed or the buffer is edited.
When the communication between the personal computer and the CPU module is disconnected during monitoring, the
background of the table turns light red to show that the content of the table is not updated.
Changed values during editing are displayed in black bold font.
Upon successfully completing the writing of values to the PROFIBUS-DP module, all the highlight displays are cleared.
When the data exchange is started, the slave input in the buffer memory is overwritten. Therefore, the table
may not indicate the actual buffer content.
In addition, when the CPU module is not stopped, the output may be overwritten by the program or the
refresh.

Version

This section describes the items for "Version".
Item
About PROFIBUS Configuration Tool
8 PROFIBUS Configuration Tool
80
8.2 "PROFIBUS Configurator Tasks" Window
Description
Displays the version of PROFIBUS Configuration Tool. ( Page 93 Checking the Software Version)