Mitsubishi Electric FX5-DP-M User Manual page 66

■"I/O Mapper" window
Item Description
Identifier Sets the global variable name and the DUT element name.
Element Type Sets the data type of the DUT element.
Class Sets the send direction of data handled by the DUT element.
• Input: Input data (DP-Slave → CPU module)
• Output: Output data (CPU module → DP-Slave)
The DUT type name is automatically set as follows. It cannot be set manually.
stSLV<FDL address of DP-Slave>MOD<slot number>_<serial number>
Example: Unit in slot 3 of the DP-Slave (FDL address 2): stSLV002MOD003_1
The configuration of DUT can be changed by inserting or deleting DUT elements.
However, DUT elements cannot be inserted or deleted to/from the module of which DUT elements are fixed.
[I/O Mapper]  Right-click
• When a row of the DUT variable is selected
• When a row of the DUT element is selected
Item Description
Insert Element before Adds a new DUT element to the row above the selected DUT element.
If the new DUT element is added after the second element, the initial settings are copied from the above DUT element and a serial
number is added to the name.
Insert Element behind Adds a new DUT element to the row below the selected DUT element.
The initial settings are copied from the above DUT element and a serial number is added to the name.
Remove Element Deletes the selected DUT element.
8 PROFIBUS Configuration Tool
64
8.2 "PROFIBUS Configurator Tasks" Window
Setting range
1 to 32 characters
• ARRAY
• BOOL
• INT
• WORD
Refer to the left column